Excerpt from complete instructions
included with kit...
DISCONNECT BATTERY BEFORE
STARTING INSTALLATION!
1) Unbolt and remove the manual mechanism. Carefully
secure the glass in the closed position.
2) Insert the electric mechanism into the door and
bolt it in positions 1, 2 and 3 as shown in the
photograph.
3) Drill a ¼-inch diameter
hole in position 4 and then bolt the bracket in place.
4) Full Length Windows: Lower the glass and then bolt
the long arm on the electric window mechanism to the
bottom runner on the glass.
Window with Side Vents: Remove the long arm on the
electric mechanism. The square plate bolts directly to
the runner on the glass in positions 5 and 6.
5) Secure the plastic tube in position 7 with a cable
tie.
6) Install and connect the switches according to
their wiring diagrams.
