|
 The Wolf Power Lock for VW Bug Kit includes:
 | A template for easy alignment for the two holes to be drilled to mount
the motors |
| Step-by-step instructions for the keyless entry module.
|
| Excerpt from complete instructions
included with kit...
1) Remove the door panels.
2) Using
the template (Photo 1) drill two ⅛-inch holes (holes
1 & 2) for the actuator mounting strip.
|
 |
3) Attach the actuator mounting strip, using the self-tapping
screws provided, and clamp the actuator rod to the door rod
(Photo 2).
To get the correct position of the clamp and
actuator:
Push lock button on the door fully down.
Push the actuator piston fully down and
then pull it back up ¼ inch.
Hold these positions and clamp the two
rods together (Photo 2) and fix actuator.
|
Wiring Bolt on the control relay under the hood next to the fuse box (Photo
3). Plug
the harness onto the relay. The 5-pin plug will only fit one way. The black wire
plugs onto the remaining terminal. |
Run 5 core cables to each door as shown (Photo 4) using the grommets and sleeving provided.
The red power wire from the control relay connects to the permanent live side
of fuse No. 9. Connect the ground wire (black) from the control relay to the
factory-fitted earth tabs next to the fuse box.
 Connect the harness to the actuators matching color for color.
Copyright ©
Wolf Elec Ltd.
Need help ordering?
E-mail us.
Phone:
+44 1279 411014 ·
Fax: 1-888-229-6378
1 The Courtyard, Mulberry Green • Old Harlow
Essex CM17 0ET • England
Webmaster:
Sheer Web
Design
|
